Germ A'Fob
Safety Device Key Ring
Mask Mate
Ear Saver
Templates for ALL our PPE items CLICK HERE



Face Shield

more sample pics below

About this product

This is a reusable part. It MUST be sanitized by the user before use and can be wiped down with Alcohol or most household sanitizers/disinfectants.

We suggest wrapping the front of the head strap with gauze or some washable comfortable fabric. We did not use a foam cushion as most of these will degrade rapidly when exposed to strong chemical cleaners and they cannot be properly sanitized.

The design has ample interior space for the user to wear glasses and respirators. It does not sit directly on the user's face.

Made in North America from recycled PET, HIPS, Nylon and/or Velcro type hook and loop.

PET is a tough, impact-resistant clear plastic that is dimensionally stable and resists a wide range of chemicals at room temperature.

HIPS is an impact-resistant plastic with excellent machinability and dimensional stability. Color is opaque white.

Nylon is a strong, stiff plastic often used for bushings, bearings, and wear pads.

Bulk boxed.

Printing

Direct digital full CMYK color onto HIPS header section. One side only.

Full bleed adds 10% additional to part pricing.

NO PANTONE PMS matches are available at this time.

Many products currently in the marketplace are incorrectly stating that they are FDA approved. FDA approval takes months of testing. The FDA has relaxed normal requirements to allow suppliers to fill an urgent need. There is a large difference between approved products and relaxed standards.

We've taken the time to submit product for ANSI standard testing - an explanation is below.

Certification:
This part meets ANSI / Z87.1 Eye & Face Protection Standards

What does ANSI Z87.1 certified mean?

To start, ANSI stands for the American National Standards Institute. The institute is dedicated to the safety and health of consumers, workers and the protection of the environment. To do this on a large level, the institute approves and issues the testing standards and guidelines to protect consumers and workers from real life hazards.

You may also see some standards written like the following: ANSI/ISEA Z87.1-2015 Standard. This means the standard is approved by ANSI and ISEA which stands for International Safety Equipment Association. ISEA is the association which actually writes and develops the standards.

ANSI and ISEA work together to bring these standards forward. It is important to note ANSI and ISEA can't set their standards as law because both are not governmental organizations and have no power to force employers to follow their standards. However, the standards can become mandatory by law if a governmental agency like OSHA (Occupational Safety and Health Administration) write ANSI standards into occupational law.

Now, why did we find the need to explain all of that to you? Well, the standard for Occupational and Educational Personal Eye and Face Protection Devices is known as the ANSI Z87.1 standard and is an OSHA law.

ANSI/ISEA Z87.1-2015 prescribes the design, performance specifications, and marking of safety eye and face products, including millions of safety goggles, spectacles, face-shields, and welding helmets, worn by workers in thousands of manufacturing and processing facilities, university and research laboratories, and other occupational settings.

The Z87.1 standard was first established in 2003 by the ISEA Z87 committee, approved by ANSI and incorporated into OSHA regulations. (Aren't you glad we gave you a little background on these three organizations?)

The standard was refined in 2010 and 2015. The 2010 revisions set restrictive design and performance standards while the 2015 revision resulted in a few changes to adapt the needs of safety environments and ever changing technology. As of November 25, 2016 businesses must provide equipment compliant with the Z87.1-2015 guidelines.

Overall, the standards help ensure personal eye and face protection products accommodate the necessary protection from real life hazards. Each product must go through rigorous third-party testing which simulates hazards such as impact by flying objects and debris, high mass impact, and sharp object penetration. In each testing scenario, the lenses and frame must stay intact to pass.

To be truthful, the Z87.1-2015 standard is a very lengthy, detailed document. As a consumer, the most important thing you need to know is that if an eye or face protection product is marked with a Z87 the product meets the standard.

...*contact us regarding
....specialty imprints

Blank and printed versions to choose from:

Pricing - includes Set Up Charges
- - 10 25 50 100 250 500 1000
FS-1P Printed

Face Shield (9.5" high x 15" wide, .020" thick face shield with nylon rivet, pivots up/open 90 degrees. Adjustable Velcro closure. Includes full color, printing on one side of white header section)

7C 20.00 16.00 12.00 8.00 6.00 5.00 4.75
- - - - - - - - -
FS-1B Blank

Face Shield (9.5" high x 15" wide, .020" thick face shield with nylon rivet, pivots up/open 90 degrees. Adjustable Velcro closure.)

7C 15.00 10.00 8.50 7.00 5.50 4.50 4.25
- - - - - - - - -

* Please contact us regarding specialty imprints.
Standard Production Time is currently 5 working days from any proof approvals
(we expect to cut this down to 3 days for unimprinted within two weeks.

FOB McAllen, TX 78503

top



Counter Shield

No additional charge for sign - a small additional charge for easel part.

Pricing - includes full CMYK color, full bleed print on front side of shield
- - 1 10 25 50 100 250 500
CS1-48 48

Counter Shield (48" high x 48" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 180.00 170.00 160.00 152.50 145.00 137.50 130.00
- - - - - - - - -
CS1-48 42

Counter Shield (48" high x 42" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 165.60 156.40 147.20 140.30 133.40 126.50 119.60
- - - - - - - - -
CS1-48 36

Counter Shield (48" high x 36" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 152.35 143.89 135.42 129.08 122.73 116.38 110.03
- - - - - - - - -
CS1-48 30

Counter Shield (48" high x 30" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 140.16 132.38 124.59 118.75 112.91 107.07 101.23
- - - - - - - - -
CS1-48 24

Counter Shield (48" high x 24" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 128.95 121.71 114.62 109.25 103.88 98.50 93.13
- - - - - - - - -
CS2-42 48

Counter Shield (42" high x 48" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 162.00 153.00 144.00 137.25 130.50 123.75 117.00
- -- -- -- -- -- -- -- --
CS2-42 42

Counter Shield (42" high x 42" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 149.04 140.76 132.48 126.27 120.06 113.85 107.64
- - - - - - - - -
CS2-42 36

Counter Shield (42" high x 36" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 137.12 129.50 121.88 116.17 110.46 104.74 99.03
- - - - - - - - -
CS2-42 30

Counter Shield (42" high x 30" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 126.15 119.14 112.13 106.87 101.62 96.36 91.11
- - - - - - - - -
CS2-42 24

Counter Shield (42" high x 24" wide counter shield, double wall corrugated polypropylene sheet with PET window)

7C 116.06 109.61 103.16 98.32 93.49 88.65 83.82
- - - - - - - - -

Set Up Cost $60.00 F

Production Time is currently 5 working days from any proof approvals for quantities 1 - 250, 7 working days for quantities 500, 10 working days for quantities 1000, and 15 working days for quantities 2500.

Sample Policy:

Due to limited material availability and demand all of the following MUST apply. Samples of this product are billable at 1000 unit net price point. Samples will only ship using valid customer shipping account numbers or with credit card to cover shipping costs.

FOB McAllen, TX and Oceanside, NY at factory discretion. Larger quantity orders will likely ship from Texas.

top



Germ A' Fob
Safety Device Key Ring

Stay safe and protected by limiting contact with the Germ A' Fob.

Avoid touching ATM, Elevator Buttons and door and drawer handles. Reduce point of contact by 99%. Ergonomic design makes for easier and safer living.

Pricing - includes full CMYK color, full bleed print on front side of fob
- - 100 250 500 1000
GAF1

Safety Device Key Ring (1.75" high x 5" wide, High Impact Poly Styrene with 1" diameter split ring)

4A 3.00 2.70 2.50 2.30
- - - - - - -
GAF2

Safety Device Key Ring (1.75" high x 6" wide, High Impact Poly Styrene with 1" diameter split ring)

4A 3.60 3.24 3.00 2.76
- -- -- -- -- -- --

Set Up Cost $60.00 F

Production Time is currently 5 working days from any proof approvals for quantities 100 - 5000, 7 working days for quantities 10000, 10 working days for quantities 25000, and 20 working days for quantities 50000.

Initial FOB Oceanside, NY 11572. We will have to produce large quantities FOB McAllen in order to maintain faster turn times. We are working on a next generation with a touch screen sensitive stylus.

top



Mask Mate Ear Savers

If your ears could speak they'd thank you for choosing Mask Mate Vinyl Ear Savers!

Mask Mate Ear Savers alleviate irritation around the ears caused by wearing face masks for extended periods of time. Three slots make it adjustable - one size fits all.

Pricing - includes full CMYK color, full bleed print on front side of part.
- - 100 250 500 1000
MMES1

1" high x 7" wide

4A 1.60 1.30 1.00 .90

Set Up Cost $60.00 F

Production Time is currently 5 working days from any proof approvals for quantities 100 - 1000.

Proudly made in North America

top


Templates for ALL PPE items
Face Shields Counter Shields
Germ A'Fobs
Mask Mate